150W dimmable driver for Triac / 1-10V
To get our CLIXX system working, it is important that the current is converted to 24V. This can be done by means of a driver. Choose a driver that matches the dimming method of the CLIXX profile. This TRIAC 150W driver is suitable for TRIAC dimmable.
You use the 150W driver when the combined wattages of the selected modules are 150W or lower. Do you arrive at a higher wattage? Then more drivers are required.
Not suitable for CLIXX SLIM driverbox.
TRIAC dimmable (trailing edge)
Perhaps the best-known form of LED dimming, where the lamp can be easily operated with an LED wall dimmer. With a dimming range of 100% you can dim the lamp until it is completely off. The driver is exchanged with a dimmable driver. No additional control wires are required for TRIAC dimming (trailing edge).
Suitable in combination with ZIGBEE 3.0 modules.