CLIXX CURVE magnetic tracks - CIRCLE surface profile - black:
|✓ Mounting clips
|✕ Light modules
ATTENTION! Use the CLIXX CURVE light modules.
In addition to straight and curved profiles, the CLIXX 24V magnetic track light system now also offers a full circle profile with a diameter of 900mm. The CLIXX Circle is made from the same profile and therefore matches perfectly with the linear collection. A beautiful round profile in which various magnetic LED light modules can be placed. The LED modules are similar in design to the regular collection, but the adapters are specifically adjusted to the round profile.
The CLIXX CURVE 24V magnetic track light system consists of compact profiles in which the magnetic LED LED modules are placed. The CLIXX CURVE system consists of recessed and surface-mounted profiles for ceiling and wall. The surface-mounted profiles can also be suspended using the suspension system. The profiles are available in lengths of 1 and 2 meters but can be shortened to create the exact desired length. The CLIXX and CLIXX CURVE profile is 76mm high and 39mm wide, or for a minimalist look, choose the CLIXX Slim profile of 58mm high and 27mm wide. Multiple profiles can be easily attached to each other for an uninterrupted line through space. Different corner profiles support even the most creative designs, giving the CLIXX CURVE system the ultimate flexibility for any lighting design.
TRIAC dimmable (trailing edge)
Perhaps the best-known form of LED dimming, where the lamp can be easily operated with an LED wall dimmer. With a dimming range of 100% you can dim the lamp until it is completely off. The driver is exchanged with a dimmable driver. No additional control wires are required for TRIAC dimming (trailing edge).
With DALI you have full control over the light. DALI makes it possible to set each lamp individually or to assign it to a group. With DALI you can create different light scenes in every room which are stored. An optional motion sensor and dimmer help to significantly reduce energy consumption. This makes DALI particularly suitable for objects such as offices, shops, restaurants or hotels. 2 extra control wires are required to connect DALI.
The LED driver is controlled by an external signal between 1 and 10V. Perfectly dimmable in a range from 10% to 100%. Applicable with many home automation systems. It is necessary to place a 1-10V actuator between the home automation system and the fixture. Two extra control wires are needed to connect 1-10V.