CLIXX SLIM magnetic tracks - TRIAC and 1-10V driver
To get our CLIXX system working, it is important that the current is converted to 24V. This can be done by means of a driver. Choose a driver that matches the dimming method of the CLIXX profile. This driver is suitable for both TRIAC dimmable and 1-10V dimmable. This driver fits in the driver box for the CLIXX SLIM.
TRIAC dimmable (trailing edge)
Perhaps the best-known form of LED dimming, where the lamp can be easily operated with an LED wall dimmer. With a dimming range of 100% you can dim the lamp until it is completely off. The driver is exchanged with a dimmable driver. No additional control wires are required for TRIAC dimming (trailing edge).
The LED driver is controlled by an external signal between 1 and 10V. Perfectly dimmable in a range from 10% to 100%. Applicable with many home automation systems. It is necessary to place a 1-10V actuator between the home automation system and the fixture. Two extra control wires are needed to connect 1-10V.
Download here the installation instructions of the power connection (pdf)