CLIXX magnetic track parts - accessories ceiling driverbox - black:
The surface-mounted driver box is often mounted on the ceiling. It is used when the driver cannot be installed elsewhere or when there is no possibility to use a driver box as extension of the track. This surface-mounted driver box is often used with the CLIXX pendant profile. The driver can be stored in this driver box. The driver converts the voltage of the CLIXX system into 24V to make it work. You will need to order the driver yourself; it is not included. Please note that the dimming method of the driver must match the dimming method of the CLIXX profile.
TRIAC dimmable (trailing edge)
Perhaps the best-known form of LED dimming, where the lamp can be easily operated with an LED wall dimmer. With a dimming range of 100% you can dim the lamp until it is completely off. The driver is exchanged with a dimmable driver. No additional control wires are required for TRIAC dimming (trailing edge).
With DALI you have full control over the light. DALI makes it possible to set each lamp individually or to assign it to a group. With DALI you can create different light scenes in every room which are stored. An optional motion sensor and dimmer help to significantly reduce energy consumption. This makes DALI particularly suitable for objects such as offices, shops, restaurants or hotels. 2 extra control wires are required to connect DALI.
The LED driver is controlled by an external signal between 1 and 10V. Perfectly dimmable in a range from 10% to 100%. Applicable with many home automation systems. It is necessary to place a 1-10V actuator between the home automation system and the fixture. Two extra control wires are needed to connect 1-10V.