CLIXX magnetic track - TUUB HANGLAMP50 - gold
The TUUB HANGLAMP50 LED module is suitable for any interior due to its appearance and dimensions. This LED module TUUB HANGLAMP50 has a higher wattage and lumen output than the LED module TUUB HANGLAMP35. The CLIXX magnetic 24V rail lighting system is very versatile and easy to configure. Use this CLIXX LED module TUUB HANGLAMP50 to light up a corner in your living room or use it above the kitchen island. It can also be used in offices, shops, restaurants and other public areas. The CLIXX magnetic LED module TUUB HANGLAMP50 is made of durable aluminum and powder-coated. The module is available in black, white and gold. For the CLIXX LED module, choose the dimming method that corresponds to the dimming method of the CLIXX profile.
The CLIXX magnetic LED modules are magnetically connected to the profiles, making them easy to position and move while the power is on. Installation of the LED modules is therefore no more than a simple "click". Each CLIXX magnetic LED module is equipped with a high-quality integrated LED light source with unique light distribution. Different LED modules provide the perfect light for every specific application. Linear modules with high lumen output and diffuse light for general lighting and spot modules with focused bright light for accent lighting make the CLIXX system an all-in-one solution.
The CLIXX magnetic rail system offers the possibility to adjust color temperature and brightness. The LED modules are standard equipped with warm neutral light with a color temperature of 3000K. Also available on request in 2700K (very hot), 4000K - 5000K (cool). The CLIXX system is standard TRIAC dimmable (phase-cut), therefore it can be controlled with an LED wall dimmer without the need for additional control wires. The 1-10V option is offered for home automation solutions. With these options, the entire rail is dimmed.
To enable control of individual LED modules or to group LED modules, you can choose the option DALI dimmable. 2 additional control wires are required for both DALI and 1-10V.